Whether it is planet reducer or gear reducer other equipment, users will worry about the use of the equipment, especially not appear oil leakage phenomenon, otherwise the impact on the equipment itself is very large.Therefore, faced with the problem of oil leakage, hhhhhh.com will teach you how to do a good job of planetary reducer corresponding precautions.
1. Improve the vent cap and check the hole cover plate.
2, smooth flow: In order to make the excess lubricating oil thrown by the gear on the bearing not accumulate in the shaft seal, it is necessary to make the excess lubricating oil flow back to the oil pool in a certain direction, that is, smooth flow.The concrete way is to cut a return oil groove inclined to the machine in the center of the lower tile of the bearing seat, and at the same time to open a gap at the end cover straight opening, the gap is opposite the return oil groove, so that the excess lubricating oil flows back to the oil pool through the gap, return oil groove.
3. Improve the shaft seal structure.
4. Adopt new sealing materials.
5. Carefully implement the maintenance process.
6, wipe: static sealing point through the governance of the gearbox, usually can achieve leak-proof, not but dynamic seal point due to improper packing aging, poor quality, assembly, surface roughness of axial higher reasons, making a move sealing point, there is still a small leakage due to poor working environment, coal dust adhering to the shaft, is oily, so you need to shut down the device, wipe the oil on the shaft.
Contact Person: Miss. Peng